Products



How much Tufoil do I need? The rule of thumb is 1:20 ratio, just divide your engine’s oil capacity by 20 to get the approx. amount of Tufoil.eg. a 4.5 litre crank case would need approx. 225 ml of Tufoil


Tufoil Engine Treatment 237ml

cars8oz$30.48 + GST each for 1 or 2 bottles, $28.30 + GST each for 3 - 5 bottles, $26.12 + GST each for 6 or more bottles.


One of these 237ml bottles is enough to treat the engine oil of most cars and 4WDs when using for the first time. On the next oil change, only half a bottle is needed to maintain the low friction properties of the engine.


Tufoil Truck Treatment 1.5 litre


trcktrtmt$143.21 + GST each, $132.98 + GST each for 3 - 5 bottles, $122.76 + GST each for 6 or more bottles.

If you want to treat a truck, boat, several cars or larger engine this size makes it much more economical. It contains the same Tufoil product as the smaller bottles, but is enough to treat up to 30 litres of engine oil. If you have already been using Tufoil in your engine then it is enough to treat 60 litres of oil.


Formula-8 Thread Sealant 100g tube


Formula_8_Teflon$30.44 + GST

FORMULA-8 is specifically made for use as a thread sealant in non-aqueous conditions. FORMULA-8 is chemically compatible with diesel fuel, liquid propane gas, and oxygen.FORMULA-8 uses PTFE in a white thixotropic paste to seal threaded joints. The seals are formed over the entire thread length. Unlike with thread-sealing tapes, the size or length of the thread is not a limiting factor. Even fine threads in instrumentation systems are sealed effectively over the entire thread length. FORMULA-8 won't deteriorate from -240°C to +260°C. It is stable in pressures up to 3,500 psi and in vacuums 10-3 torr. Certified by NASA in USA and BAM in Germany.



Tufoil Lightning Grease 226 gram


Lightning$39 + GST

LIGHTNING GREASE (a jelled version of Tufoil) works where all others fail. Field tests show that LIGHTNING GREASE extends the life of crucial machine parts. LIGHTNING GREASE significantly lowers operating temperatures, thereby extending machinery and bearing life. This easily sheared grease is great for applications where low break-out torque, low temperature, stick slip and wear are required. Use LIGHTNING GREASE on:

  • fine bearings

  • gears

  • steppers

  • servo bearings

  • robots

LIGHTNING GREASE is also great for old machines. Put a drop on the surface, work the mechanism and wipe off the excess with a clean tissue. Repeat until the tissue is no longer discolored by dirt and metal debris left by the old lubricant. With just a dab on all the surfaces and old sticky gear boxes, bearings and mechanisms are brought back to life. Supplied in 226 g (1/2 pound) tub.